Photo Album: Foundation Crack Leads To a Wet and Moldy Basement in Bethlehem, PA

This Bethlehem, PA homeowner observed a crack on the foundation wall outside of his home. With further investigation, it appeared the crack was allowing water to leak through to the basement, causing the floor and walls to become wet that eventually led to mold growth. Wanting to get their wet basement problem solved before it caused more damage, they searched the internet for a local, trusted professional to come in and do the job. After reading Liberty Basement Systems positive reviews online, they decided to contact the office and schedule a free estimate.    Upon inspection, inspector Robert Whary decided the best way to solve this problem was to install FlexiSpan Wall Crack Repair System, BrightWall Basement Paneling System, and WaterGuard Drainage System. FlexiSpan is a permanent solution to keeping wall cracks dry, will never crack or leak, and can flex as much as 3/4" as the wall moves in the future. Once the FlexiSpan is dry, BrightWall Paneling System will be installed over top. This panel will create a bight, clean look to the basement, but also stops any water vapor from permeating through the walls. If for any reason water comes through, it will run down the back, unseen side of the panel and will drain in to the WaterGuard Drainage System. WaterGuard will collect any water leakage, and safely drain it away.      Now that this homeowner’s foundation crack is sealed with FlexiSpan, and covered by the BrightWall Paneling System, with triple protection from the WaterGuard Drainage System,  they will no longer have to worry about a wet, moldy basement again. They are completely happy and satisfied with the work our production crew provided to get the job done!